Highly Liquid user profile: Pastel Fractal

Chicago-based artist Alexander DeGraaf employs several UMR2 and MSA-T boards for his ongoing project Pastel Fractal. Alex uses MIDI control for robotics and live audience participation in addition to more traditional sequencing and synthesis functions.

Pastel-Fractal-Robots

Alex writes:

I have three sampling keyboards into which I have installed UMRs: two Yamaha VSS-30s and one Casio SK-8.  I use different samples on the keyboards for different compositions such as: my singing voice, a dog bark (sampled from SK-5), a TR-808 clap, a Doc Watson banjo riff, a Chet Atkins guitar riff, and some scatting sounds.

In my installation sculptures, I’ve used as many as two MSA-T MIDI Decoders to turn my MIDI note messages into voltage pulses for as many as fourteen small 24V solenoid motors. I’ve engineered these motors to reset immediately after being triggered, and I’ve connected them in various ways to percussive elements within the sculptures. In this way, I am able to MIDI-sequence robotic percussion strikes and sounds in sync with my compositions that are otherwise played by more conventional MIDI sound engines such as synthesizers, keyboards, and drum machines. The robotic percussive elements within the sculpture each provide a unique source from which sounds stimulate the inhabitant of the sculpture. I provide additional sound sources – besides robotic percussions and the main P.A. – by attaching small speakers to individual keyboards and drum machines so they may be hung around the sculpture or handed out to the inhabitants to pass and move about. Thus, inhabitants of the sculpture – also known as members of the audience – can contribute to the composition during a performance with these floating pieces of hardware by engaging buttons or keys within their reach.

More from Pastel Fractal can be found at Vimeo, Soundcloud, and Facebook.

Yamaha CS01 MIDI retrofit project: detailed description and pictures

Special thanks to HL Forum member ElSmurf of Belgium for providing a detailed description of his excellent UMR2 MIDI retrofit module installation inside a Yamaha CS01. His words and photos follow.  

CS01 Large-16

I just finished work on my CS-01, so I thought I’d share the process with you.

My plan was to get the UMR-2 inside of the Yamaha without altering its functioning, so I could still be able to play it as is, with batteries and through the crappy speaker. This is way too much fun to do away with! So when I opened up the synth for the first time, I decided rather quickly that this would be the only place inside the enclosure that had enough real estate :

CS01 Large-1

This presented two obvious problems though – one corner would have to be cut, and I would have to drill a hole to let the LED housing pass through. Cutting the corner was fairly straightforward but drilling the hole for the LED proved to be more challenging. On the larger version you can see how close the hole gets to one of the UMR’s LED leads.

CS01 Large-2I then attached 3 small bolts with nuts, and super-glued these to the case of the synth.

CS01 Large-3

They kept the UMR in its place but also provided some elevation so the board sat ontop of the modulation destination slot.

CS01 Large-4

Here you can see the LED hole alligned with the hole in the UMR. At this point I thought I didn’t actually need the contacts for the program switch, since I didn’t read the manual the whole way through. This obviously made things a little challening when it was time to do the setup! :D

Once the superglue was dry I could unscrew the nuts and remove the UMR to solder the cables.

I embedded the resistor and diode in the cable so it wouldn’t take up too much space.

CS01 Large-5

Then came the scary part : drilling the hole for the MIDI socket !

CS01 Large-6

First a 2mm metal drill, followed by a 10mm wood drill, and then a 10mm metal drill.

CS01 Large-7

Then the big guns…

CS01 Large-10

Getting that huge 16mm drill to tear up the plastic just didn’t feel right so I felt it was my duty to take some photos to compare the drill sizes…

CS01 Large-9

CS01 Large-8

I think you need a steady hand to drill in 30-year old plastic, especially considering how close you’re drilling to the edges. But everything worked out just fine.

CS01 Large-11

Next up was soldering the other sides of the cables to the synth.

CS01 Large-12

I have little experience with soldering on PCB, I mostly make only cables, so I was happy I had no shorts or burned through anything! After bending the cables everything kind of fit the way it fit before I put in the UMR.

CS01 Large-14

A little interlude – my screw storage system :

CS01 Large-13

Then came the hard part of doing the setup procedure. I had to put the synth on 2 small boxes so I could access the keyboard from below and access the UMR to short out the program switch. Which like I said proved to be tricky since the big contacts where gone!

CS01 Large-15

Luckily everything worked on the first try, so after doing the setup and teaching it the matrix, all I had to do was cut the black cloth that keeps dust out to compensate for the UMR, and put everything back together. This is what it looks like now :

CS01 Large-17

It took about 10 hours from start to finish, half of that time went in to cleaning – I dismantled the keyboard and cleaned every key separately. Now all I have to do is find my 2 missing slider caps – check the EG!

UMR2: MIDI Input and Output for Vintage Keyboard Synthesizers

The new UMR2 (Universal MIDI Retrofit) adds MIDI input/output functionality to non-velocity-sensitive keyboard synthesizers. Use your vintage keyboard as a sound module that responds to MIDI input or as a MIDI controller that generates MIDI output.

The UMR2 is 100% factory-assembled and supports a wide range of vintage keyboards. It supersedes previous HL MIDI retrofit products including the UMR, CS01-MIDI, VL-1-MIDI, and SKM kits. Installation information is being posted at the UMR2 forum by user request. Please join the forum to discuss the installation for your keyboard model.

Example installation guides:

The UMR2 is available for immediate worldwide shipment. For more information, please visit the ordering FAQ.

User Project Roundup, Part 12

MIDISpeak, Gakken SX150, and circuit bent Yamaha RX-8 demo by Squelchbox:

Recycled wood MD24 MIDI-to-trigger box by Unatronics, creator of Beep-It.  (See also: Mike Una’s MIDI CPU based patchable MIDI sequencer):

A MD24 based MIDI-to-trigger box by Osica Bending:

MIDI CPU-based “MIDI Podcaster” MIDI Controller by Spunky Toofers:

Circuit bent Roland TR-505 with MD24 + photorelay “AutoBender” by GumiElectronic:

Circuit bent Yamaha PSS-140 with UMR MIDI retrofit by Matt Kaip:

Yamaha CS01 with CS01-MIDI retrofit, driven by Latronic Norton sequencer:

User Project Roundup, Part 10

Daren Ager’s modular drum demo, using an MPA MIDI Decoder as an interface between a Machinedrum and modular gear:

Ronin Otter’s UMR / Casio SK-1 installation how-to video (also see Nomeist’s UMR mini-review):

MIDI2600 / Synthcart / Atari 2600 demo video by The Longhorn Engineer (also see this MIDI2600-External enclosure discussion):

Spunkytoofer’s latest noise machine which includes an MSA-R for MIDI control (lots of other devices here):

Stylinghead’s photos of a clever CS01-MIDI internal install by Billy Neenos:

A Boss DR-110 / MD24 MIDI retrofit project from Darren at MakerSpace, Wellington, New Zealand:

User Project Roundup, Part 9

Steve, a robot drummer based on the MSA-T MIDI decoder, built by Texas Central Positronics.

Video here, here, and here:

Komega‘s MD24-based Musifore MIDI visualizer:

MIDISpeak / Speak & Spell controlled by Ableton Live.  Video here and here:

A Yamaha CS01 with an installed CS01-MIDI kit, controlled by an x0xb0x:

The latest suitcase SK-1 from The Umbrella Company, with installed UMR for MIDI control:

http://komegamusic.com/